| PART |
Description |
Maker |
| B59830C0160A070 |
Leaded Disks, Coated, 110 V 含铅磁盘，涂层，110
|
EPCOS AG
|
| MAX6326 MAX6326R22-T MAX6326R23-T MAX6326R24-T MAX |
3-PIN, ULTRA-LOW-POWER SC70/SOT ヌP RESET CIRCUITS
3-Pin, Ultra-Low-Power SC70/SOT P Reset Circuits
3-Pin Ultra-Low-Power SC70/SOT P Reset Circuits
3-Pin, Ultra-Low-Power SC70/SOT
µP Reset Circuits
From old datasheet system
3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits
3-Pin / Ultra-Low-Power SC70/SOT P Reset Circuits
Replaced by TPA3123D2 : 25-W Stereo Class-D Audio Power Amplifier with SE Outputs (TPA3120) 24-HTSSOP -40 to 85
Input Module; Output Device:SCR; Output Voltage Min:20Vrms; Output Voltage Max:120Vrms; Load Current Max:1A; Switching:Zero Cross; Leaded Process Compatible:Yes; Peak Reflow Compatible (260 C):Yes RoHS Compliant: Yes
350-mW Mono Class-AB Audio Amplifier 8-SOIC
350-mW Stereo Class-AB Audio Amplifier 8-SOIC
Stereo, Medium Power, Class-AB Audio Amplifier 20-SO PowerPAD -40 to 85
2-W Stereo Class-D Audio Amplifier with Stereo Class-AB Headphone Drive 32-HTSSOP -40 to 85
350-mW Mono Class-AB Audio Amplifier 8-MSOP-PowerPAD
6-W Stereo Class-D Audio Power Amplifier (TPA3005) 48-HTQFP -40 to 85 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
CABLE ASSEMBLY; SC MALE TO SC MALE; 50 OHM, RG214/U COAX, DOUBLE SHIELDED 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
3-Pin, Ultra-Low-Power SC70/SOT ????P Reset Circuits 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
20-W Stereo Class-D Audio Power Amplifier (TPA3100) 48-HTQFP -40 to 85 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
1.4-W Mono Class-D Audio Amplifier (TPA2005) 15-BGA MICROSTAR JUNIOR -40 to 85 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
3-Pin, Ultra-Low-Power SC70/SOT ????P Reset Circuits 3引脚，超低功耗SC70/SOT封装的μP复位电路
20-W Stereo Class-D Audio Power Amplifier (TPA3100) 48-VQFN -40 to 85 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
2-W Stereo Class-D Audio Amplifier 24-HTSSOP -40 to 85 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
1-W Stereo Class-D Audio Amplifier 24-HTSSOP -40 to 85 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
1-Form-A iso PLUS-264 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
Stereo Medium Power Class-D Audio Amplifier with Stereo Headphone Driver 48-HTSSOP -40 to 125
CAP .15UF 400V METAL POLY
Automotive Catalog Mono Filter-Free Class-D Audio Amplifier 16-TSSOP -40 to 105
3-Pin, Ultra-Low-Power SC70/SOT ???录P Reset Circuits
6.5-W Mono Class-D Audio Power Amplifier (TPA3007) 24-TSSOP -40 to 85
3-Pin, Ultra-Low-Power SC70/SOT UP Reset Circuits
3-Pin, Ultra-Low-Power SC70/SOTµP Reset Circuits
3-Pin, Ultra-Low-Power SC70/SOT μP Reset Circuits
|
Maxim Integrated Produc...
Maixm
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
MtronPTI
MAXIM INTEGRATED PRODUCTS INC
MAXIM - Dallas Semiconductor
|
| G901CS-DC110-12 G901CS-DC110-1NIL G901CS-DC110-NIL |
Relay. Coil voltage 110 VDC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 110 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 110 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 12 VDC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 12 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 12 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 15 VDC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 15 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 15 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 15 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 18 VDC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 18 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 18 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 18 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 24 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 24 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 24 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 48 VDC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 48 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 48 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 5 VDC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 5 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 5 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 5 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 6 VDC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VAC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 12 VAC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 12 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 220 VAC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 24 VAC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 24 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 24 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 24 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 48 VAC. Mounting PCB w / Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 48 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 48 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 48 VAC. Mounting PCB w/ Top QC. Contact form C. Covering sealed. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 12 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 24 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 18 VDC. Mounting PCB w/Top QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 15 VDC. Mounting PCB w/Top QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltag 110 VDC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltag 12 VDC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltag 15 VDC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltag 24 VDC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltag 18 VDC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltag 48 VDC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltag 5 VDC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltag 6 VDC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltag 9 VDC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 110 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 220 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 48 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 110 VDC. Mounting PCB w/Top QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 12 VDC. Mounting PCB w/Top QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 12 VAC. Mounting panel w/ all QC. Contact form C. Covering dust cover. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 12 VAC. Mounting panel w/all QC. Contact form C. Covering dust cover. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 110 VAC. Mounting panel w/ all QC. Contact form C. Covering dust cover. Spacing UL873. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting panel w/ all QC. Contact form C. Covering dust cover. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VAC. Mounting panel w/ all QC . Contact form C. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting panel w/ all QC. Contact form C. Covering dust cover. Spacing UL873. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting panel w/all QC. Contact form C. Covering dust cover. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 110 VAC. Mounting panel w / all QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 12 VAC. Mounting panel w / all QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 12 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 220 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 220 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 24 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 24 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 24 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 48 VAC. Mounting panel w / all QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 48 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 48 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 48 VAC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 110 VDC. Mounting panel w / all QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 110 VDC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VDC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 110 VDC. Mounting panel w/all QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 12 VDC. Mounting panel w / all QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 12 VDC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 12 VDC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VDC. Mounting panel w/all QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 15 VDC. Mounting panel w / all QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 15 VDC. Mounting panel w/ all QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VAC. Mounting PCB w / Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting PCB w / Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 12 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB w / Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 220 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 24 VAC. Mounting PCB w / Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 24 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 24 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 48 VAC. Mounting PCB w / Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 48 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 48 VAC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 110 VDC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 110 VDC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VDC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VDC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 12 VDC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 12 VDC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 15 VDC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 15 VDC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VAC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 220 VAC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 24 VAC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 24 VDC. Mounting PCB w/Top QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 48 VDC. Mounting PCB w/Top QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 6 VDC. Mounting PCB w/Top QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 9 VDC. Mounting PCB w/Top QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 110 VAC. Mounting PCB w/ Top QC. Contact form A. Covering sealed. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 48 VAC. Mounting PCB w/Top QC. Contact form A. Covering dust cover. Spacing STD UL508. Insulation STD. Class B.
Relay. Coil voltage 5 VDC. Mounting PCB w/Top QC. Contact form A. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 5 VDC. Mounting PCB w/ Top QC. Contact form A. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 5 VDC. Mounting PCB w/ Top QC. Contact form A. Covering dust cover. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 5 VDC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 5 VDC. Mounting PCB w / Top QC. Contact form A. Covering sealed. Spacing UL873. Insulation class F.
Relay. Coil voltage 5 VDC. Mounting PCB w/ Top QC. Contact form A. Covering open frame. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 220 VAC. Mounting PCB w/Top QC . Contact form A. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB w/Top QC . Contact form C. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting panel w/ all QC . Contact form A. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting PCB w/Top QC . Contact form A. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting PCB w/Top QC . Contact form C. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting PCB w/Top QC . Contact form C. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 48 VAC. Mounting PCB w/Top QC . Contact form C. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 12 VAC. Mounting panel w/ all QC . Contact form B. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting panel w/ all QC . Contact form B. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting panel w/ all QC. Contact form B. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 220 VAC. Mounting panel w/ all QC. Contact form B. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 110 VDC. Mounting panel w/all QC. Contact form B. Covering open frame. Spacing StdUL508. Insulation STD.classB.
Relay. Coil voltage 12 VAC. Mounting PCB w/ Top QC. Contact form B. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 220 VAC. Mounting PCB w / Top QC. Contact form B. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 24 VAC. Mounting PCB w/ Top QC. Contact form B. Covering open frame. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 24 VAC. Mounting PCB w/ Top QC. Contact form B. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 48 VAC. Mounting PCB w/ Top QC. Contact form B. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 110 VDC. Mounting PCB. Contact form A. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB . Contact form A. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting PCB. Contact form A. Covering dust cover. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VAC. Mounting PCB. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 110 VDC. Mounting PCB. Contact form A. Covering dust cover. Spacing UL873. Insulation class F.
Relay. Coil voltage 110 VDC. Mounting PCB. Contact form A. Covering dust cover. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 110 VAC. Mounting PCB . Contact form A. Covering dust cover. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 110 VDC. Mounting PCB. Contact form A. Covering dust cover. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 110 VAC. Mounting PCB. Contact form A. Covering dust cover. Spacing UL873. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB. Contact form A. Covering dust cover. Spacing UL873. Insulation Std. Class B.
Relay. Coil voltage 220 VAC. Mounting PCB. Contact form A. Covering dust cover. Spacing UL873. Insulation class F.
Relay. Coil voltage 110 VAC. Mounting PCB. Contact form A. Covering open from. Spacing STD UL508. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB. Contact form A. Covering open frame. Spacing Std UL508. Insulation STD.classB.
Relay. Coil voltage 110 VDC. Mounting PCB. Contact form A. Covering open frame. Spacing UL873. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB w / Top QC. Contact form A. Covering dust cover. Spacing UL873. Insulation class F.
Relay. Coil voltage 220 VAC. Mounting PCB w/ Top QC. Contact form A. Covering dust cover. Spacing UL873. Insulation Std. Class B.
|
Global Components & Controls
|
| IXFT28N50F IXFH28N50 IXFH28N50F |
HiPerRF Power MOSFETs F-Class: MegaHertz Switching 28 A, 500 V, 0.19 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-247
HiPerRF Power MOSFETs F-Class: MegaHertz Switching HiPerRF功率MOSFET F级：兆赫开
|
IXYS, Corp.
IXYS[IXYS Corporation]
|
| F1740-3800 F1740-447-3820 F1740-427-3800 F1740-427 |
Suppression Capacitors for Washing Machines/Dishwashers Class X1/Y2 AC 275V/250V 抑制电容器洗衣机/洗碗机类X1/Y2交流275V/250V
XTAL MTL T/H HC49/US
Class X1 - AC275V; Class Y2 - AC250V
|
Vishay Intertechnology, Inc.
Vishay Intertechnology,Inc.
VISAY[Vishay Siliconix]
|
| PAM8008 PAM8008DR |
3W STEREO CLASS-D with DC VOLUME, POWER LIMIT and ANTI-SATURATION
3W STEREO FILTERLESS CLASS-D AUDIO AMPLIFIER WITH DC VOLUME CONTROL AND POWER LIMIT
|
Diodes Incorporated
|
| AD1996 AD1996ACPZ AD1990 AD1990ACPZ AD1994 AD1992 |
Class-D Audio Power Amplifier D类音频功率放大器
Class-D Audio Power Amplifier – 2 × 5W
Class-D Audio Power Amplifier – 2 × 25W
|
ANALOG DEVICES INC
Analog Devices, Inc.
AD[Analog Devices]
|
| APT6011B2VR APT6011LVR |
POWER MOS V 600V 49A 0.110 Ohm
Power MOS V is a new generation of high voltage N-Channel enhancement mode power MOSFETs.
|
Advanced Power Technology
|
| SUM110P06-08L-E3 |
110 A, 60 V, 0.008 ohm, P-CHANNEL, Si, POWER, MOSFET, TO-263AB ROHS COMPLIANT, TO-263, 3 PIN
110 A, 60 V, 0.008 ohm, P-CHANNEL, Si, POWER, MOSFET, TO-263AB TO-263, 3 PIN
|
Vishay Intertechnology, Inc.
|
| TUP110 TUP110-D23 TUP110-Q40 TUP110-Q41 TUP110-Q42 |
110 WATT POWER ADAPTERS
|
Tumbler Technologies TRUMPower
|
| NFS110-7602PJ NFS110-7601PJ NFS110-7612J NFS110-76 |
110 W universal input ac-dc power supply
|
Emerson Network Power
|
| 110MT140KPBF 110MT100KPBF 110MT120KPBF 110MT160KPB |
Three Phase Bridge (Power Modules), 90/110 A
|
Vishay Siliconix
|
